Goodsjack Custom Hydraulic Press Solution Servo Hydraulic Press Machine Manufacturer

The oil temperature of   hydraulic press machine   should be appropriate, and the oil temperature of the oil tank should not exceed 60 °C. It is more appropriate to control it to work within the range of 35 to 55 °C. From a maintenance point of view, too high oil temperature should also be absolutely avoided. If the oil temperature rises abnormally, it should be checked. Common reasons are as follows: 1. The viscosity of the oil is too high. 2. The oil quality deteriorates and the resistance increases. 3. The performance of the cooler is not good, such as insufficient water, scale in the pipe, etc. 4. Air in the circuit should be completely purged. After the air enters the circuit, because the volume of the gas is inversely proportional to the pressure, the movement of the hydraulic cylinder will also be affected with the change of the load, so air mixing should be avoided). In addition, air is an important cause of oil deterioration and heat generation. Goodsjack Hydraulic Machinery,

Vietnam customer purchased the batches   frame guide hydraulic press machines   from us after half years communicating with us. Thank you customers for their trust in our hydraulic press machines! After more than two months of hard work and intense production by all the colleagues of the company, the batches were finished and will exported to Vietnam. The first batch of servo  frame guide rail hydraulic press machines  were delivered on time. From the  (SZX)Shenzhen Bao'an International Airport  and  (CAN)Guangzhou Baiyun International Airport  to our factory 1.5 hour's driving. Warmly welcome to visit us at any time. GoodsJack Hydraulic Press Machinery Co.,Ltd Delishi Hydraulic Machinery Technology Co.,Ltd Tel: +86-769-83061993  83223615 Fax: +86-769-83231691 Address:  No3 Jinfu Road, Jinma Industrial Park, Liaobu, Dongguan City, GuanDong Province, China E-mail:  info@goodsjack.com ,  sales@goodsjack.com ,  sales1@goodsjack.com Skype: alice.goodsjack WhatsApp/Wechat: +86-13642

Hydraulic oil is made of highly refined base oil, adding various additives such as anti-wear, anti-oxidation, anti-corrosion, demulsifier, pour point depressant and defoamer, and refined by scientific formula. Good anti-wear, anti-rust and anti-corrosion properties can slow down   hydraulic press machine   wear and prolong service life. Good anti-foaming and air release properties can ensure accurate transmission and minimize micro-shocks. Excellent anti-oxidation can slow down the decay rate of oil and prolong the oil change period. Good hydrolysis stability, zero weight loss of copper sheet, can be used in axial piston pump with steel friction pair. Good demulsibility and good compatibility with sealing materials. Usually there are two types of hydraulic oil we use: 1. L-HM46 hydraulic oil (selected in summer) 2. L-HM32 hydraulic oil (selected in winter) L-HM stands for anti-wear hydraulic oil, and 32 or 46 is the viscosity grade of the oil. A lot of sales may recommend northern cust

The   automatic ceramic powder hydraulic press machine   is a four-column structure. It is mainly suitable for powder metallurgy and the production of mechanical parts mainly for structural parts. It is mainly suitable for ceramic powder, but also for iron, copper, aluminum-based powder, stainless steel powder, and precision ceramics.Press molding of electronic ceramics, graphite and hard synthetic gold products. Choose the appropriate hydraulic press products according to the size of the pressed ceramic products. The performance characteristics of  automatic ceramic powder hydraulic press machine 1. The design of the fully automatic ceramic powder hydraulic press adopts a pressure relief device to increase the circuit, which meets the requirements of low noise and fast stamping. It can reduce power consumption, save energy, and consume less power during standby. 2. The hydraulic system of the fully automatic ceramic powder molding hydraulic press is installed in the workshop, with goo

The salient features of the 1000 ton   hydraulic compression molding press   has good rigidity, high precision, compact structure, high cost performance and economical application. The 1000-ton hydraulic press can realize two forming processes of constant pressure and fixed stroke. It has the function of holding pressure and delay, and the working pressure stroke can be adjusted within the specified range. The centralized control of buttons can realize manual, semi-automatic and automatic three operation modes. The electrical system is controlled by PLC, which can integrate the edge-stretching slider to realize single-action process. The  1000 ton hydraulic compression molding press  is used for the hot pressing forming and pressing process of composite materials, SMC, glass fiber reinforced plastics and molding compounds to meet various requirements of the pressing process. Hydraulic press machine parameters such as table size, opening, stroke, speed, etc. can be customized according

There are many styles and specifications of ceramic rings, and they are widely used. According to its material, it is divided into alumina ceramic ring and zirconia ceramic ring, which has a series of advantages such as heat resistance, corrosion resistance, wear resistance and erosion resistance. It can be used in all biological inner filters, outer filters, drop purification filtration systems and garden pond filters for filtration. So what kind of equipment is used to produce the pressed ceramic ring?                        According to the material of the ceramic ring, it is recommended to use a  hydraulic power compacting press  for pressing the ceramic ring. It adopts a three-beam four-column or four-beam four-column structure design. The pressing time, pressure and product thickness can be adjusted appropriately. Ensure that the product pressure is stable, the density is constant, and the size error is small. The hydraulic system of the equipment often uses high-quality hydrauli

The  5000 ton hydraulic press  is mainly used for hot forging processes of various forgings: billet upsetting, drawing, hot forging, die forging, reaming, bending, etc. It can also be used for drawing, blanking and bending of sheet metal parts , calibration and other processes. The 5000 ton hydraulic press adopts the structure of three beams and four columns, and is mainly composed of welding body, oil cylinder, mobile worktable, hydraulic transmission system, numerical control electronic control system, and automatic lubrication system.                                  The fast  5000 ton hydraulic press  has independent power system and numerical control electrical system. The hydraulic system adopts the two-way cartridge valve control technology, the structure is stable and the oil leakage point is reduced. The electrical control system adopts the numerical control PLC programmable controller, which improves the reliability and stability of the numerical control electronic control sy

Oil presses and hydraulic presses sound very similar. What is the difference between a oil press and a   hydraulic press ? Some people call it a hydraulic press, some people call it a oil press, and it is often shared that it is not very clear, the feeling is not too clear, the difference explained below the drive can also be driven by water, because water is a liquid, and the other is a mixture of oil and natural gas called an empty hydraulic press or a hydraulic press. In fact, a oil press is one type of hydraulic press. Hydraulic press machine  uses liquid as the working medium to transmit energy and successfully realize various processes. In addition to forging and forming, the hydraulic press can also be used for calibrating, pressing, packaging, pressing blocks and so on. The hydraulic press includes a hydraulic press and a hydraulic press. The water-based liquid as the working medium is called a hydraulic press, and the oil-based working medium is called a hydraulic press. The s