Automatic Ceramic Powder Hydraulic Press Machine
The automatic ceramic powder hydraulic press machine is a four-column structure. It is mainly suitable for powder metallurgy and the production of mechanical parts mainly for structural parts. It is mainly suitable for ceramic powder, but also for iron, copper, aluminum-based powder, stainless steel powder, and precision ceramics.Press molding of electronic ceramics, graphite and hard synthetic gold products. Choose the appropriate hydraulic press products according to the size of the pressed ceramic products.
1. The design of the fully automatic ceramic powder hydraulic press adopts a pressure relief device to increase the circuit, which meets the requirements of low noise and fast stamping. It can reduce power consumption, save energy, and consume less power during standby.
2. The hydraulic system of the fully automatic ceramic powder molding hydraulic press is installed in the workshop, with good heat dissipation performance and convenient maintenance.
3. The cylinder stroke, speed and pressure are adjustable, and the studio is all electroplated.
4. The frame structure is firm, can withstand greater pressure, and adopts precision slider device.
5. High precision of parallelism and perpendicularity, stable pressing force, and no warping phenomenon.
6. Two-hand operation, with manual, automatic, up and down jog. Fully automatic ceramic powder hydraulic press facilitates mold installation and alignment.
The main features of the automatic ceramic powder hydraulic press are that the stroke and opening are relatively large, and there is a blanking hole in the middle of the worktable.
1. The fuselage beam of the ceramic powder hydraulic press is welded by integral cast steel or steel plate double-pass welding, and the internal stress is eliminated by vibration or tempering treatment to ensure that the fuselage is not easily deformed.
2. The upper plane of the working table of the fully automatic ceramic powder hydraulic press and the lower plane of the sliding beam are precisely milled by a large floor boring and milling machine and a CNC gantry milling machine to ensure the flatness and parallelism of the surface, thereby ensuring the accuracy of the hydraulic press.
3. After intermediate frequency quenching and chrome plating, the surface hardness of the column reaches about 50 degrees of Rockwell hardness, which effectively prevents the surface of the column from being damaged during installation and transportation.
4. The cylinder piston rod is processed by cylindrical polishing, quenching, chrome plating, cylindrical grinding and other processes to ensure the hardness and smoothness of the surface of the piston rod, reduce bump damage, and avoid scratching the cylinder sealing ring and oil leakage.
5. The hydraulic pump station adopts a new sheet metal design, and the automatic ceramic powder hydraulic press is more ergonomic and has a high degree of integration.
6. The core components of the fully automatic ceramic powder hydraulic electromechanical control system use high-quality electrical appliances, with high sensitivity and low failure rate, which greatly improves work efficiency.
评论
发表评论