Multi-direction Die Forging Hydraulic Press for Water Separator
The multi-direction die forging hydraulic press for water separator is a precision forging technology for split die forging on a multi-directional die forging hydraulic press, and its deformation is mainly extrusion. It is used for multi-directional forging and precision forging process of blanks, forgings, large, medium and small forgings.
The multi-direction die forging hydraulic press for water separator can form forgings with complex structural shapes, significantly improve material utilization and reduce machining hours. It has been proved by practice that the water separator multi-directional die forging hydraulic press can obtain highly complex shapes, accurate dimensions, and no flying. Forgings with edge, no forging slope and cavity, shape and size as close as possible to the size of the finished part, thereby significantly improving the material utilization of the part.
1. Realize simultaneous processing of multiple forgings in one forging process, which greatly improves production efficiency.
2. Realize one-time molding of complex parts, which can reduce processing steps and reduce mold investment.
3. Realize one-time molding of the internal structure of the part, which can improve the precision of the part.
4. Multi-direction die forging hydraulic press for water separator realizes forging of various materials, which can improve the performance of parts.
5. Realize the forging of various structures, which can improve the appearance quality of parts.
Multi-direction die forging hydraulic press for water distributor, the hydraulic press is divided into main cylinder mold clamping, side cylinder forging and side cylinder mold clamping, main cylinder forging and other process actions, and each cylinder operates independently. It is a high-performance and cost-effective hydraulic equipment.
Multi-direction die forging hydraulic press with water separator, the mold is installed on the working table, and the billet sent from the lower roller table is sent into the cavity of the mold through the feeding manipulator. The forging transfer station is equipped with a blanking manipulator, a conveying chain and a storage area for rough forgings. The billets forged by the multi-directional die forging hydraulic machine of the water separator are transported to the conveying chain by the unloading manipulator, and the billets on the conveying chain are conveyed by the walking device To the rough forging storage area.
The vibration and noise of the multi-direction die forging hydraulic press for water separator is small, which meets the requirements of environmental protection. The efficiency of upsetting is much higher than that of a forging hammer. The price is low, and the workshop does not require shockproof. The forged workpiece has good internal and external combination uniformity, reliable quality and few defects. These advantages make the multi-directional forging hydraulic press widely used in aviation, petroleum, chemical industry, automobile and tractor manufacturing, and atomic energy industry. It can forge hollow frames, pistons, shafts, cylindrical parts, large valve bodies, pipe joints, and aircraft landing gear. , engine cases, disk shaft assemblies, etc., including a variety of products.
From the (SZX)Shenzhen Bao'an International Airport and (CAN)Guangzhou Baiyun International Airport to our factory 1.5 hour's driving. Warmly welcome to visit us at any time.
Delishi Machinery Technology CO.,LTD.
Goodsjack Hydraulic Machinery Co.,Ltd.
Tel: +86-769-83061993 83223615
Fax: +86-769-83231691
Address: No3 Jinfu Road, Jinma Industrial Park, Liaobu, Dongguan City, GuanDong Province, China
E-mail: info@goodsjack.com, sales@goodsjack.com, info@dgdelishi.com
Skype: alice.goodsjack
WhatsApp/Wechat: +86-13642957273
WhatsApp/Wechat: +86-13509801050
评论
发表评论