DSBS-500C 4 Column Hydraulic Press

  

DSBS-500C 4 Column Hydraulic Press

Product Application

1. Stamping , forming , shallow , drawing and pressing assembly etc.
2. Forming of spectacle parts, lock parts, metal hardware, pressing assembly of electronic connectors , electric components and rotor & stator of motor etc.
3. Suitable for cold forging, warm forging, hot forging, and applicable to liquid metal forming and ceramic powder metallurgy pressing forming.

Video

Technical Parameters

 

DSBS-A Cylinder Half Type Single Movement Hydraulic Press

 

Model		Units	Specifications
			DSBS-10	DSBS-20	DSBS-50	DSBS-100	DSBS-200	DSBS-300	DSBS-500	DSBS-800	DSBS-1000	DSBS-2000
Main cylinder capacity		ton	10	20	50	100	200	300	500	800	1000	2000
System pressure		Mpa	13	13	13	20	25	25	25	250	25	25
Main cylinder stroke		mm	250	300	300	200	150	150	150	160	250	400
Open height		mm	400	450	450	450	450	450	500	700	700	900
Working table height		mm	820	820	820	850	850	900	1000	1100	1100	1350
Working tabel size	L-R	mm	400	400	450	450	500	550	700	850	900	1500
	F-B	mm	400	400	450	450	500	650	800	950	950	1500
Master cylinder speed	Down speed	mm/s	150	130	100	100	100	135	110	110	190	200
	Press speed	mm/s	30	20	15	15	15	5	4	3	3-10	3-10
	Return speed	mm/s	150	130	100	100	100	100	100	100	180	180
Motor power		kw	2.2	3	4	5.5	5.5	7.5	15	18.5	45	55*2

The above parameters are for reference, ordering the contract shall prevail.

DSBS-A series can according to customer's requirement.

 

Product Advantage

1. Use servo control system to save energy 50-70%.
2. Pressure stability, pressure error ±1bar, repeatable positioning accuracy up to±0.02mm.
3. Low failure rate, automatic alarm and fault indication, one-button reset function.
4. Remote maintenance service can be realized.
5. Can set up multi-stage pressure, multi-speed and continuous fixed-pressure function.
6. Adopting an integral frame structure, high strength, low distortion and durability.
7. Eight-sided rigid guide rails have good guide precision, strong side pressure resistance and easy maintenance.
8. Suitable for cold forging, warm forging, hot gorging, and applicable to liquid metal forming and ceramic powder metallurgy pressing forming.

Safety Measures:
● Two-handed Schneider start buttons on the front side of the bed table
● Safety photoelectric light curtain on the front side of the bed table, covering the whole daylight open
● Emergency stop button on the front side of the bed table, manual reset required
● Pneumatic safety ratchet bar to prevent the sudden fall of the slider, in case of any error happened to the hydraulic system
● Interlocked safety mesh shield covers the left/right/rear side of bed table, can be opened and removed.
● NEMA style electric control cabinet with electric disconnect switch
● Working indicator: triple color indicating light (green/yellow/red)

Manufacture Ability

Certifications

Service Cases