Goodsjack Custom Hydraulic Press Solution Servo Hydraulic Press Machine Manufacturer

  Three key points of C frame hydraulic press Preparation work before  C frame hydraulic press 1. The operator of the hydraulic press machine must be trained to master the equipment performance and operating technology before they can work independently. 2. Before operation, clean up all kinds of debris on the mold and wipe off any dirt on the hydraulic press rod. 3. The hydraulic press must be installed when the power is cut off. It is forbidden to collide with the start button, handle and pedal on the foot switch. 4. Install the upper and lower molds to center, adjust the mold gap, do not allow one side to deviate from the center, confirm that the mold is fixed and try the pressure again. 5. Before the hydraulic press works, start the equipment idling for 5 minutes. At the same time, check whether the oil level of the oil tank is sufficient, whether the sound of the oil pump is normal, whether the hydraulic unit, pipes, joints, and pistons are leaking. Advantages of C frame hydraulic

  Precautions for starting up the   hydraulic press machine . Today, we will lists thee steps for normal starting of the hydraulic press. 1. Check whether the hydraulic oil pump, control valve, and pressure gauge are normal, and whether the oil temperature is within the allowable range; 2. Check whether the mold has cracks and whether the fastening screws are loose; 3. Turn on the power switch of the four-column hydraulic press and start the cooling cycle motor; 4. Start the main oil pump motor of the hydraulic machine; 5. Check the oil level of each oil tank, whether there is oil leakage in each oil circuit and hydraulic pipe fittings, and whether each connection piece is loose; 6. Check the deflection of the pressure pointer of the pressure gauge. If you find that it is swinging or not moving, you should stop and check the rated pressure of the equipment, and do not exceed the limit during use: 7. Check and clean up the work surface or mold of the hydraulic press. Other sundries on i

  Not only we supply standard  hydraulic press machine , but also tend to provide custom hydraulic press machine solution. Yesterday,we packaged and shipped the 500*2 Ton Hydraulic Press Machine to oversea customer. Although during the Covid-19 pandemic, the client could not go to China to visit our factory, we communicate with videos and emails.At last the client have a big faith in us and we made this deal successfully. We believe we can have a good cooperation!