Three Important Key Points of C Frame Hydraulic Press

 Three key points of C frame hydraulic press

Preparation work before C frame hydraulic press
1. The operator of the hydraulic press machine must be trained to master the equipment performance and operating technology before they can work independently.
2. Before operation, clean up all kinds of debris on the mold and wipe off any dirt on the hydraulic press rod.
3. The hydraulic press must be installed when the power is cut off. It is forbidden to collide with the start button, handle and pedal on the foot switch.
4. Install the upper and lower molds to center, adjust the mold gap, do not allow one side to deviate from the center, confirm that the mold is fixed and try the pressure again.
5. Before the hydraulic press works, start the equipment idling for 5 minutes. At the same time, check whether the oil level of the oil tank is sufficient, whether the sound of the oil pump is normal, whether the hydraulic unit, pipes, joints, and pistons are leaking.

Advantages of C frame hydraulic press
1. It has the characteristics of good structural rigidity, good guiding performance and fast speed.
2. Convenient manual adjustment mechanism can adjust the indenter or upper worktable to press at any position in the stroke, and can also adjust the length of fast forward and work progress arbitrarily within the design stroke;
3. The overall welded solid open structure can keep the body rigid enough while having the most convenient operating space.

Features of C frame hydraulic press
1. The solid open structure welded by the C frame hydraulic press can keep the machine body rigid enough and at the same time have the most convenient operating space.
2. The C frame hydraulic press has the characteristics of good structural rigidity, good guiding performance and fast speed.
3. The convenient manual adjustment mechanism of the C frame hydraulic press can adjust the indenter or the upper worktable to press at any position in the stroke, and can also adjust the length of the fast forward and the work progress arbitrarily within the design stroke.